Members
GBP ^

No products in the basket.

Cancer Care Parcel Logo
Cancer Care Parcel Logo

No products in the basket.

For Everyone Touched By Cancer

How Physics Plays A Role In The Treatment Of Cancer

Written by Leonardo Barrios on 
1st July, 2019
Updated: 29th January, 2024
Estimated Reading Time: 4 minutes

There is a wide range of radiation in nature, to which we are exposed at all times, however; the use of radiation in medicine has been one of the great advances in applied basic sciences.

Medical physics includes the use of ionizing radiation for medical purposes, either to diagnose a disease or to use them in treatment.

Radiotherapy includes the therapeutic application of ionizing radiation such as X-rays, gamma rays, electrons, protons, light ions, and that can be applied in different ways.

The most widely used is Teletherapy, which involves applying radiation from outside of the patient through a machine that produces irradiation. Brachytherapy is another way of radiotherapy, and consists in place radiation sources directly into the tumor. A medical physicist contributes to ensuring a high standard of quality radiotherapy service in the hospital environment. The essential responsibility in the clinical practice of the medical physicist is to optimize the use of radiation to produce a quality diagnostic or therapeutic procedure. The public and, above all, the patients, are unaware of its existence and its role in the complex network of Radiation Oncology.

Linear accelerator used in the Teletherapy application.

The medical physicist performs in Radiotherapy tasks closely linked to the treatment of oncological patients, such as the calculation of treatment times, design of treatment techniques, determination of the distribution of energy imparted inside the patient are under their control responsibility. Due to this, there is a remarkable implication in the quality and the success of the treatment. The determination of the dose applied to the patient is based on a detailed knowledge of the characteristics of the radiation that are used, which are obtained from important experimental work on the equipment. These characteristics must also be subjected to constant checks to ensure the optimal state of the equipment and sources.

In the hospital environment, the medical physicist works with a multidisciplinary group, together with radiotherapist, technicians and dosimetrist; while the radiation oncologist makes the decision about prescription of treatment, medical physicist is in charge of planning the treatment and the technician is in charge of the application of the same communication between these professionals is vital since, they optimize the treatment applied to the patient.

Planning of the treatment in linear accelerators.

To carry out the planning of the treatment, medical physicist uses tools such as diagnostic images to precisely locate the tumor volume, guaranteeing that the radiation is directed to this specific region, without affecting organs that are around it. In this way, it is ensured that the treatment provided to the patient is more precise. The different image forms are fused to the Computed Tomography (CT) image to allow an optimal spatial correlation. The Magnetic Resonance Imaging (MRI) is especially useful in the anatomical definition of tumors of the central nervous system, head and neck, prostate and soft tissues. The Positron Emission Tomography – Computed Tomography (PET – CT) provides functional information, which allows defining areas that require higher doses and areas that must be protected.

The Computed tomography images are used to calculate the dose distribution quantifying the absorption of radiation for each tissue. In treatment planning, position, number, direction, shape, energy, and dose proportion for the radiation fields or beams are optimized. The optimization of the plan is an iterative process between radiation oncologist and the medical physicist until reaching the appropriate plan for treatment.

Planning of radiotherapy treatment using CT images. Where the organs at risk are observed as well as the tumor volume.

The performance of the medical physicist in radiotherapy is key to providing a quality service, for which his scientific and practical training must be of a high level. Their knowledge is also directed to the development and optimization of new treatment techniques, having an important role in adoption, implementation, development, safe use and optimization of advanced techniques and technologies.

The main functions of the medical physicist in radiotherapy are:

(a) Technical specifications of equipment and design of facilities.

Collaboration in the definition of purchasing treatment units, simulators, imaging systems, and treatment planning systems; participating in the design of the facilities, especially performs or verifies the calculation of the shields, ensuring that all safety and functionality requirements are met.

(b) Acceptance and commissioning of equipment.

Certifies that the units of therapy, simulation, images and planning of treatment work in accordance with the technical specifications of purchase and that the equipment is able to be used clinically.

(c) Technical supervision of equipment maintenance.

Supervises maintenance of the equipment, and is responsible for its acceptance, authorizes its clinical use after maintenance, is responsible for ensuring that no alteration caused by maintenance or repair affects the operation or calibration of the treatment units, simulation and planning, and recording the results of their evaluations.

(d) Calibration of radiotherapy equipment.

Is responsible for the calibration of all the treatment units and verification of the activity of the radioactive sources according to protocols adopted. (e) Quality guarantee. Is responsible for the elaboration and execution of the physical aspects of the quality assurance program. Specifies basic standards that will be verified when accepting a device and putting it into service for clinical use; adapts or develops the acceptance and commissioning procedures, establishes and carries out periodic quality controls that verify that the technical parameters of equipment operation remain within acceptable margins in relation to the reference values.

Among multiple assignments that can be developed by the medical physicist to be the person in charge of the Radiological Protection in the hospital, of both the public and the healthcare staff; is responsible for estimating and, insofar as possible, reducing the dose of radiation that it is imparted to the population as a result of diagnostic tests. This implies designing the structural shields of the rooms where radiation emitting equipment is installed.

The hospital is an interesting medium for a medical physicist, there are a series of tasks for which it is needed, and many others where can develop your own research lines and, in all of them, have the opportunity to work with training professionals very different from yours. On the other hand, medical physicist's work has an immediate justification in the quality of patient care, within the scope of its competence. Radiotherapy has made far-reaching advances that have allowed us to increase the number of successfully treated patients and reduce complications at the same time.

Further reading

Talking about cancer

Current cancer research

Dear Dad – From The Scientist You Left Behind

Related Posts

How my Cancer Experience Inspired me to Follow my Dreams.

Taking You Through My Life On A Day-To-Day Basis As A 19 Year Old Cancer Patient, During The Height Of The Coronavirus Pandemic.

Read More
Hope Among Us: Three Young Breast Cancer Survivors

As Young Breast Cancer Survivors Rhonda, Jennifer And Mari Decided To Collaborate And Document Their Experiences On Paper.

Read More
Trying to Find Work With A Cancer Diagnosis? Astriid Can Help.

The disappointment ensuing a shortened career is equally distressing if not more, than the struggle with cancer.

Read More
People's Experiences Of Breast Cancer Can Help After A Diagnosis

If you don’t present yourself to a doctor, then they can’t help you and the sooner you go then the easier it is to be saved.

Read More
1 2 3 51
We strongly advise you to talk with a health care professional about specific medical conditions and treatments. The information on our site is meant to be helpful and educational but is not a substitute for medical advice.

Leave a Reply to Elena Defelice Ursini Vincent Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

One comment on “How Physics Plays A Role In The Treatment Of Cancer”

Sign up for more information
I HAVE CANCER 
3 Days Of Tips For People With Cancer
MY FRIEND HAS CANCER
3 Days Of Tips To Help You Help Your Friend

MONTHLY NEWSLETTER
Newsletter For
Anyone Touched By Cancer
Sustainability Matters
Every purchase, big or small, has a footprint. But sustainability challenges don’t have a quick fix.
Organisation for Responsible Businesses.
Recycle
EcoFriendly
Cancer Care Parcel Ltd. Registered in England and Wales.
Trading Address: Highstone House, 165 High Street, Barnet, Herts. EN5 5SU, UK. Registered Office: 7a High Street, Barnet, Herts, EN5 5UE.
Company Number 14415197, VAT number is GB428826076,  EORI number is XI428826076000
SITEMAP
cartmagnifiercrosschevron-downquestion-circle